Product Category

You are here: Home » Products » PTFE Products » PTFE Rod/Bar » Full Size Molded PTFE Rod


Share to:

Full Size Molded PTFE Rod

  • Customized
  • JSLW

Tetrafluorocarbon materials will become brittle when the temperature is lower than -185ºC, and will creep and crack when the temperature is higher than 200ºC, so it should not be used at excessively high temperatures. PTFE has low thermal conductivity and large linear expansion coefficient. Cold flow will occur under load. Adding different fillers such as glass fiber, graphite, molybdenum disulfide, bronze powder, etc. can improve the performance of PTFE rods.

Product performance:

No Filled Compound And Content  Tensile Strength Mpa Ultimate Strength% Shrinkage
1 20% glass fiber 16±3 300±50 2.0-3.0
2 25% glass fiber 15±3 250±50 1.5-2.5
3 15%glass fiber 5%graphite 18±3 250±50 1.6-2.6
4 60%bronze 19±3 150±50 1.5-2.5
5 15%carbon fiber 19±3 250±50 2.0-3.0
6 25%carbon fiber 18±3 150±50 1.6-2.6
7 15%graphite 20±3 200±50 1.8-2.8

Product use:
Modified PTFE rods use industries: chemical, petrochemical, oil refining, chlor-alkali, acid production, phosphate fertilizer, pharmaceuticals, pesticides, chemical fiber, dyeing, coking, coal gas, organic synthesis, non-ferrous smelting, steel, atomic energy and high-purity product production (such as Ion-exchange membrane electrolysis), transportation and operation of viscous materials, food and beverage processing and production departments with strict hygiene requirements.
Equipment used: Sealing parts of flange connections such as pipes, valves, pumps, pressure vessels, heat exchangers, condensers, generators, air compressors, exhaust pipes, and refrigerators.

Product Display:图片展示页
Product Packaging:运输
Factory And Equipment:工厂与设备
Our Service

1. Providing technical consultation.
2. Samples are free. 
3.We could customize various products with your brand logo according to your requirements. 
4. Your inquiry will be replied within 1 hours during working time,Within 24 hours when rest time. 
5.Orders will be produced exactly as request and approved samples.
6. Before shipment,our QC will have inspection to make sure the quality. 
7.We always try best to ensure every order to delivery in time. 
8.Special packaging according to request.

No. 519-105, Fudan Science and Technology Park, Yangzhong City, Zhenjiang City, Jiangsu Province
About us
The factory is located in Yongsheng Industrial Zone, Baqiao Town, Yangzhong City, Jiangsu Province. It is a high-tech enterprise specializing in the research and development and production of new material products.
Sign up for our newsletter to receive the latest news.
​Copyright © 2022 Jiangsu Linwei New Material Co., Ltd. All rights reserved. Support by LeadongSitemap